Antique Copper/Silver/Gold/Brass/Bronze Hammer Texture Pure Polyester Powder Coating

Powder
coating is a new type of 100% powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.
Most powder coating is used by electrostatic spraying on the metal surface, and then cure in oven, eventually form a solid layer.
Applications of Product/powder coating powder paint
Our service
RAL colors coating powder
Pantone colors
Color- matching regarding customer requirement is available
GENERAL TYPES
Epoxy Polyester / Hybrid powder coating
Pure Polyester Powder Coating
Pure Epoxy Powder coating/FBE powder coating
Metallic powder coating
Hammer tone finish color powder coating
Texture color powder coating powder(We often export RAL 7032,RAL 7035,RAL7040,RAL 7042 ,RAL 2004 ,RAL 9005 , RAL 3020 fine texture
)
Textures include sand grain, hammer, silk pattern, sand textured, metallic, vary colors powder coating
PHYSICAL PROPERTIES
Specific gravity :1.2 ~
1.5g/cm3 up to defferent colors
Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
Level of liquidity:24 ~
27 mm
CURING CONDITIONS
180 °C ~
200 °C (work piece temperature) for 10-15 minutes
AVERAGE COVERAGE
8-12 square meters /
kg, thickness 60-80 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight and 25 kg net weight.Powder Coating Application
Powder Coating for aluminium extrusion
Powder Coating for racking system
Powder Coating for cabinet
Powder Coating for gas cylinder
Powder Coating for metal fence
Powder Coating for furniture
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6
months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a
non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer
free samples
to you.