ZrO2 16.7% AR/ARG Fiberglass Chopped Strand
Our alkali resistant glassfiber chopped strand is designed for using in dry mix systems or other premixing processes GRC(Glassiber reinforced cement). Such as drainage channels, cable troughs, meter boxes, wall cladding panels or in architectural applications such as decorative screen walling, etc.

Properties:
Good liquidity and high integrity, Excellent alkali resistant and durability; Been approved by Sheffied University, UK.
Package and Storage
Package:
20kgs/kraft bag, 50 bags/pallet, 20 pallets/20'FCL(on 2 levels), total net weight for approximately 18 tons.
Other packing methods are available, according to customers' requirements.
Storage:
AR fiberglass chopped strand should be stored dry in their original package, the best conditions being at a temperature of between 15 and 35, and at a relative humidity of between 35 and 65%. If the product is stored at low temperature (below 15), it is advisable to condition in the workshop for 24 hours before use to prevent condensation.
Premix GRC
HEJ 16.7% Premix is a high integrity chopped fibre, designed for using in dry mix systems or other premixing processes for subsequent molding into a GRC intricate component.

20kgs/kraft bag, 40bags/800Kg/pallet/109*109*105cm; 50bags /1000kg/109*109*125cm, 20palltes/ 1*20' FCL, N.W.18ton.
Huierjie AR Glassfibre roving pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15ºC- 35 dergee & relative humidity between 35%- 65%.If stored below 15 degree, it is advisable to hold in workshop for 24 hours to prevent condensation before use.
High Intergrity
HEJ 16.7% High integrity has a low-tex strand which permits efficient reinforcement at low dosages. The coating size systems give easy incorporation whilst retaining best strand integrity, especially used in the electric closet panels.
Water dispersed
HEJ 16.7% water dispersed can be simply added to the mix at the workshop without the need of a special equipment and disperse into filaments in a matrix of calcium silicate slurry, cement slurry etc.
Application:
The 'Premix' production technique involves pouring or pumping a cement/fibre mix into a mould, similar to other precast production processes. The mix is compacted using vibration or by adding other components. The unit is left in mould to set and demoulded the following day.Pre-mix has the advantages that moulds can be simper to produce and strip.
Benefits:
Excellent alkali resistant and durability
Highest integrity during mix
Good stiffness
Good fluidity
Be compatible with concrete slurry
Been Tested in Sheffied University,UK
Packaging & Storage:
20kgs /kraft bag, 40bags/800Kg/pallet/109*109*105cm; 50bags /1000kg/109*109*125cm, 20palltes/ 1*20' FCL, N.W.18ton.
Huierjie AR Glassfibre roving pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15ºC- 35ºC
& relative humidity between 35%- 65%.If stored below 15ºC, it is advisable to hold in workshop for 24 hours to prevent condensation before use.
Note:
Huierjie ARG Fiber are manufactured with high Zirconia rate in compliance with the BSEN 15422:2008 and ASTM C1666/C 1666/M-07 and under the recommendations of GRCA.